TriggerBindings

A TriggerBinding allows you to extract fields from an event payload and bind them to named parameters that can then be used in a TriggerTemplate. For instance, one can extract the commit SHA from an incoming event and pass it on to create a TaskRun that clones a repo at that particular commit.

Note: Trigger uses the parameter name to match TriggerBinding params to TriggerTemplate params. In order to pass information, the param name used in the binding must match the param name used in the template.

Structure of a TriggerBinding

There are 3 way of declaring a TriggerBinding:

  1. Inline or embedded inside a Trigger

  2. Using the TriggerBinding custom resource so that the binding params can be reused across multiple trigger

  3. Using the ClusterTriggerBinding custom resource in order to promote reuse within an entire cluster

Inline bindings

The simplest way to declare bindings is within a Trigger itself:

apiVersion: triggers.tekton.dev/v1beta1
kind: Trigger
metadata:
  name: push-trigger
spec:
  bindings:
  - name: gitrevision
    value: $(body.head_commit.id)
  - name: gitrepositoryurl
    value: $(body.repository.url)
  template:
    ref: git-clone-template

TriggerBindings

The binding used above can be put in a TriggerBinding CRD in order to be reused across multiple triggers:

apiVersion: triggers.tekton.dev/v1beta1
kind: TriggerBinding
metadata:
  name: pipeline-binding
spec:
  params:
  - name: gitrevision
    value: $(body.head_commit.id)
  - name: gitrepositoryurl
    value: $(body.repository.url)
  - name: contenttype
    value: $(header.Content-Type)

A Trigger resource can then refer to this binding:

apiVersion: triggers.tekton.dev/v1beta1
kind: Trigger
metadata:
  name: push-trigger
spec:
  bindings:
  - ref: pipeline-binding
  template:
    ref: git-clone-template

ClusterTriggerBindings

A ClusterTriggerBinding is a cluster-scoped TriggerBinding that you can reuse across your entire cluster. You can reference a ClusterTriggerBinding in any Trigger in any namespace. You can specify multiple ClusterTriggerBindings within your Trigger as well as specify the same ClusterTriggerBinding in multiple Triggers.

Below is an example ClusterTriggerBinding definition:

apiVersion: triggers.tekton.dev/v1beta1
kind: ClusterTriggerBinding
metadata:
  name: pipeline-clusterbinding
spec:
  params:
    - name: gitrevision
      value: $(body.head_commit.id)
    - name: gitrepositoryurl
      value: $(body.repository.url)
    - name: contenttype
      value: $(header.Content-Type)

When referencing a ClusterTriggerBinding, you must specify a kind value within the bindings field. The default is TriggerBinding which denotes a namespaced TriggerBinding. For example:

---
apiVersion: triggers.tekton.dev/v1beta1
kind: EventListener
metadata:
  name: listener-clustertriggerbinding
spec:
  serviceAccountName: tekton-triggers-example-sa
  triggers:
    - name: foo-trig
      bindings:
        - ref: pipeline-clusterbinding
          kind: ClusterTriggerBinding
        - ref: message-clusterbinding
          kind: ClusterTriggerBinding
      template:
        ref: pipeline-template

Specifying parameters

A TriggerBinding allows you to specify parameters (params) that Tekton passes to the corresponding TriggerTemplate. For each parameter, you must specify a name and a value field with the appropriate values.

Accessing data in HTTP JSON payloads

Tekton can use a TriggerBinding to access data in the headers and body of an HTTP JSON payload. To do so, it uses JSONPath expressions encapsulated within a $() wrapper. Keys in HTTP JSON headers are case-sensitive.

For example, below is a valid expression:

$(body.key1)
$(.body.key)

On the other hand, the expressions below are invalid:

.body.key1 # INVALID - Expression is not wrapped in `$()`.
$({body) # INVALID - Trailing curly brace is missing.

If a $() wrapper is embedded inside another $() wrapper, Tekton parses the contents of the innermost wrapper as the JSONPath expression. For example:

$($(body.b)) # Parsed as $(body.b)
$($($(body.b))) # Parsed as $(body.b)

Accessing data added by Interceptors

An interceptor can add additional useful data that can be used by a TriggerBinding. Data added by interceptors can be accessed under the top-level extensions field e.g. $(extensions.field-name). In the following example, the CEL interceptor adds a field that is then accessed by the trigger binding:

apiVersion: triggers.tekton.dev/v1beta1
kind: Trigger
metadata:
  name: push-trigger
spec:
  interceptors:
    - name: add-truncated-sha
      ref:
        name: "cel"
      params:
        - name: "overlays"
          value:
          - key: truncated_sha
            expression: "body.pull_request.head.sha.truncate(7)"
  bindings:
    - name: truncated_sha
      value: $(extensions.truncated_sha)
  template:
    ref: git-clone-template

Accessing EventListener Event Context

The EventListener has a set of internal data points that are maintained for the complete processing of a single event. These values are available for use in TriggerBinding objects.

This data can be accessed on the context parameter, as an example:

$(context.eventID) # access the internal eventID of the request

Accessing JSON keys containing periods (.)

To access a JSON key that contains a period (.), you must escape the period with a backslash (\.). For example:

# Body contains a `tekton.dev` field: {"body": {"tekton.dev": "triggers"}}
$(body.tekton\.dev) -> "triggers"

Fallback to default values

If Tekton fails to resolve the JSONPath expressions you have configured against the HTTP JSON payload, it falls back to the default value in the corresponding TriggerTemplate, if specified.

Field binding examples

Below are some examples of Tekton performing field binding based on the most commonly used field definitions:


`$(body)` -> replaced by the entire body

$(body) -> "{"key1": "value1", "key2": {"key3": "value3"}, "key4": ["value4", "value5", "value6"]}"

$(body.key1) -> "value1"

$(body.key2) -> "{"key3": "value3"}"

$(body.key2.key3) -> "value3"

$(body.key4[0]) -> "value4"

$(body.key4[0:2]) -> "{"value4", "value5"}"

# $(header) -> replaced by all headers from the event

$(header) -> "{"One":["one"], "Two":["one","two","three"]}"

$(header.One) -> "one"

$(header.one) -> "one"

$(header.Two) -> "one two three"

$(header.Two[1]) -> "two"

Specifying multiple bindings

You can specify multiple bindings within the Trigger definition in your EventListener. This allows you to reuse as well as mix-and-match your bindings across multiple Trigger definitions. For example, you can create a Trigger with a binding that extracts event data and another binding that provides information on the deployment environment:

apiVersion: triggers.tekton.dev/v1alpha1
kind: TriggerBinding
metadata:
  name: event-binding
spec:
  params:
    - name: gitrevision
      value: $(body.head_commit.id)
    - name: gitrepositoryurl
      value: $(body.repository.url)
---
apiVersion: triggers.tekton.dev/v1alpha1
kind: TriggerBinding
metadata:
  name: prod-env
spec:
  params:
    - name: environment
      value: prod
---
apiVersion: triggers.tekton.dev/v1alpha1
kind: TriggerBinding
metadata:
  name: staging-env
spec:
  params:
    - name: environment
      value: staging
---
apiVersion: triggers.tekton.dev/v1alpha1
kind: EventListener
metadata:
  name: listener
spec:
  triggers:
    - name: prod-trigger
      bindings:
        - ref: event-binding
        - ref: prod-env
      template:
        ref: pipeline-template
    - name: staging-trigger
      bindings:
        - ref: event-binding
        - ref: staging-env
      template:
        ref: pipeline-template

Troubleshooting TriggerBindings

You can use the binding-eval tool to evaluate your TriggerBinding against a specific HTTP request to determine the parameters that Tekton generates from that request when your corresponding Trigger executes.

To install the binding-eval tool use the following command:

$ go install github.com/tektoncd/triggers/cmd/binding-eval@{version}

Below is an example of using the tool to evaluate a TriggerBinding:

$ cat testdata/triggerbinding.yaml
apiVersion: tekton.dev/v1alpha1
kind: TriggerBinding
metadata:
  name: pipeline-binding
spec:
  params:
  - name: foo
    value: $(body.test)
  - name: bar
    value: $(header.X-Header)

$ cat testdata/http.txt
POST /foo HTTP/1.1
Content-Length: 16
Content-Type: application/json
X-Header: tacocat

{"test": "body"}

$ binding-eval -b testdata/triggerbinding.yaml -r testdata/http.txt
[
  {
    "name": "foo",
    "value": "body"
  },
  {
    "name": "bar",
    "value": "tacocat"
  }
]